+353 (0)1 4523432
Hamilton ML625-CNT Dual Channel Cont Disp Adv. ML625-CNT
PART NO: BRML625-CNT
Hamilton Microlab 600 Series Dual Syringe Continuous Dispenser with Advanced Controller
The ML625-CNT ships complete with the Concorde Hand Probe, Universal Valves, Fill/Dispense Tubing, Accessory Holder, country specific Power Cord, and the choice of two syringes
If no syringes are selected at the time of the order, two 10mL syringes will be included.
Bubble Free Prime syringe
For any syringe pump, the key to achieving the most accurate dispenses is eliminating all air from the fluid path
Traditional syringes trap approximately 50µl of air between the tip of the syringe and the valve, which makes small syringes difficult to prime
The Bubble Free Prime (BFP) syringe has a conical plunger tip that extends through the threaded termination and into the valve
This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.
Universal Valves
The high precision Universal Valves of the ML600 are robust and flexible
The innovative fluid logic enables the same Universal Valve to be used in all MICROLAB 600 dispensing and diluting applications
Simply interchange the valve plugs and tubing to achieve the required configurations.
The ML625-CNT ships complete with the Concorde Hand Probe, Universal Valves, Fill/Dispense Tubing, Accessory Holder, country specific Power Cord, and the choice of two syringes
If no syringes are selected at the time of the order, two 10mL syringes will be included.
Bubble Free Prime syringe
For any syringe pump, the key to achieving the most accurate dispenses is eliminating all air from the fluid path
Traditional syringes trap approximately 50µl of air between the tip of the syringe and the valve, which makes small syringes difficult to prime
The Bubble Free Prime (BFP) syringe has a conical plunger tip that extends through the threaded termination and into the valve
This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.
Universal Valves
The high precision Universal Valves of the ML600 are robust and flexible
The innovative fluid logic enables the same Universal Valve to be used in all MICROLAB 600 dispensing and diluting applications
Simply interchange the valve plugs and tubing to achieve the required configurations.
| Technical Specification - Power Rating: 24 VDC, 2.5A - Power Requirements: 100-240V 1.5A max 50-60 Hz - Volume Left and Right Syringe: Custom Volume Left and Right Syringe - Program Memory: 2 GB - Syringe Drive Mechanism: Stepper motor driven high precision lead screw with encoder. Syringe Pump Specifications - Single and Dual Syringe Pump - Accuracy +/- 1% - Precision +/- 0.2% - Flow Rate 0.003 - 6000µl/second (depending on the syringe that is selected) - Syringe Resolution 0.02% of the nominal syringe volume - Compatible Syringes - 10, 25, 50, 100, 250, 500µl, 1, 2.5, 5, 10, 25, and 50ml - Fluid Path - Borosilicate, PTFE, CTFE - Communication Type Ethernet, 10/100 BASE-T - Communication Protocol .NET 2.0 Application Programming Interface (API) - Pump Memory One method stored in non volatile memory - Calibration Factory tested and traceable to N.I.S.T. standards - Certifications CE, CSA - Power Rating 24 VDC, 2.5A - Dimensions 7 x 5.5 x 10.5 inch (177.8 x 139.7 x 266.7mm) - Weight 13 lbs (5.9 kg) Controller Specifications - MICROLAB 600 Controller - Screen Size 5.7 inch (15 cm diagonal) - Screen Resolution 640(H) x 480(V) pixels - Tilt Positions 5 positions from 90° to flat - Mounting Options On top of the Syringe Pump, Bench Top, or Wall Mount - Program Memory 2 GB (with Advanced Upgrade) - Communication Type Ethernet, 10/100 BASE-T - Power rating 24 VDC, 2.5A - Dimensions 2.25 x 6.5 x 7 inch (57.2 x 165.1 x 177.8mm in down position) - Weight 1.9 lbs (0.86 kg) | |
| Catalogue Number | 6.320 560 |
| Manufacturer | Hamilton |
| Manufacturer P/n | ML625-CNT |