+353 (0)1 4523432
| Syringe filters PuradiscTM Polyethersulfone For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C. Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.25EU/ml. -Inlet female luer-lock -Outlet luer cone or extended tip -Autoclavable at 121°C Hydrophilic membrane for aqueous and light organic solutions with a low binding capacity for proteins. Product Specification: Filter diam.: 13mm Pore size: 0.45 µm Housing: PP Type: non sterile | |
| Catalogue Number | 9.951 241 |
| Manufacturer | GE Healthcare |
| Manufacturer P/n | 6782-1304 |
| VWR Ref | 514-0511 |
| Pore size µm | 0,45 |
| Connetion inlet | Luer-Lock female |
| Connetion outlet | Luer-Slip male |
| Sterile | No |
| Autoclavable | Yes |
| Material housing | PP |
| Material membrane | PES |
| Feature | Hydrophilic |
| PK | 100 |
| Filter area cm² | 1.3 |
| Membrane Ø mm | 13 |
| VWR: | 514-0511 |
- Laboratory > Filtration > Syringe Filters > Manual Standard
- Chromatography > Syringe Filter > Manual Standard
- Laboratory > Distillation, Separation, Filtration > Filtration > Syringe Filter > Manual Standard
- Laboratory > Distillation, Separation, Filtration > Filtration > Syringe Filter > Syringe filters Puradisc™, PES