Mixed-bed ion exchanger made of stainless steel
Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers.
For subsequent demineralization of reverse osmosis systems.
-pressure resistant to 10 bar
-optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit
-flow rates up to 700 litres/hour
-the unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality
-can be connected to the raw water network directly and without a pressure reducer
-resistant to alternating pressure
-hard rubber collars vulcanized to the base and top of the unit offer effective protection
-convenient transport thanks to the handles embedded into the top part of the unit
-conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter
-Also available with shut-off when the limit value is reached and limit control
E28d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter
E40d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter
E28dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge
E40dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge
E28dA Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, conductivity meter with limit switch and electrovalve
E40dA Pressure resistant mixed-bed unit made of nylon, permanent pressure resistant to 8 bar, conductivity meter with limit switch and electrovalve
Specifications E 28 / E 40 d
Exchange capacity* at 10°dH 2800 litres / 4000 litres
Flow max. litres/hour 500 / 700
Diameter in cm 24 / 24
Height incl. LF in cm 74 / 84
Height of cartridge only in cm 60 / 70
Product Specification:
Product Type: E40dZ
* Limit value 20 µS/cm
|
+353 (0)1 4523432
