+353 (0)1 4523432
IKA Basic Batch Analytical Mill A11 0002900000
PART NO: 4AJ-9737801
Qty In Stock: 2
Batch mill for 2 different grinding procedures:
- Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater
- This beater can be used for a Mohs hardness up to 6 ( included with delivery )
- Cutting grinding for pulverizing soft, fibrous materials with a cutting blade ( not included with delivery )
- Moist and gluey materials can be pulverized by adding water
- Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80ml ( included with delivery )
- For embrittlement of grinding materials with liquid nitrogen in the grinding chamber
- Optionally, a 250ml grinding chamber is available
Technical Specifications:
- Process type batch
- Operating principle cutting/impact
- Motor rating input 160 W
- Motor rating output 100 W
- Speed max. 28000 1/min
- Circumferential speed max. 53 m/s
- Usable volume max. 80ml
- Feed hardness max. 6 Mohs
- Feed grain size max. 10mm
- Material beater/cutter stainless steel 1.4034
- Material milling chamber stainless steel 1.4571
- Power-on time ON 1 min
- Power-om time OFF 10 min
- Milling chamber, can be cooled with water no
- Mill feed can be cooled in milling chamber with dry ice yes
- Mill feed can be cooled in milling chamber with liquid nitrogen yes
- Dimensions (W x H x D) 85 x 240 x 85mm
- Weight 1.5kg
- Permissible ambient temperature 5 - 40°C
- Permissible relative moisture 80 %
- Protection class according to DIN EN 60529 IP 43
- Voltage 220 - 240 / 100 - 115 V
- Frequency 50/60 Hz
- Power input 160 W
- Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater
- This beater can be used for a Mohs hardness up to 6 ( included with delivery )
- Cutting grinding for pulverizing soft, fibrous materials with a cutting blade ( not included with delivery )
- Moist and gluey materials can be pulverized by adding water
- Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80ml ( included with delivery )
- For embrittlement of grinding materials with liquid nitrogen in the grinding chamber
- Optionally, a 250ml grinding chamber is available
Technical Specifications:
- Process type batch
- Operating principle cutting/impact
- Motor rating input 160 W
- Motor rating output 100 W
- Speed max. 28000 1/min
- Circumferential speed max. 53 m/s
- Usable volume max. 80ml
- Feed hardness max. 6 Mohs
- Feed grain size max. 10mm
- Material beater/cutter stainless steel 1.4034
- Material milling chamber stainless steel 1.4571
- Power-on time ON 1 min
- Power-om time OFF 10 min
- Milling chamber, can be cooled with water no
- Mill feed can be cooled in milling chamber with dry ice yes
- Mill feed can be cooled in milling chamber with liquid nitrogen yes
- Dimensions (W x H x D) 85 x 240 x 85mm
- Weight 1.5kg
- Permissible ambient temperature 5 - 40°C
- Permissible relative moisture 80 %
- Protection class according to DIN EN 60529 IP 43
- Voltage 220 - 240 / 100 - 115 V
- Frequency 50/60 Hz
- Power input 160 W
| Grinding mill, A11 basic Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery). -Moist and gluey materials can be pulverized by adding water -Grinding chamber made of Tefcel (PTFE, glass fibre-reinforced) with stainless steel inlet (1.4571), useful volume 80ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber -Optionally, a 250ml grinding chamber is available Specifications:- Process type: batch - Operating principle: cutting/impact - Motor rating input: 160 W - Motor rating output: 100 W - Speed max.: 28000rpm (off load) - Circumferential speed max.: 53 m/s - Usable volume max.: 80ml - Feed hardness max.: 6 Mohs - Feed grain size max.: 10mm - Material beater/cutter: stainless steel 1.4034 - Material milling chamber: stainless steel 1.4571 - Power-on time: ON 1 min - Power-on time: OFF 10 min - Milling chamber, can be cooled with water: no - Mill feed can be cooled in milling chamber with dry ice: yes - Mill feed can be cooled in milling chamber with liquid nitrogen: yes - Dimensions (W x H x D): 85 x 240 x 85mm - Weight: 1.5kg - Permissible ambient temperature: 5 - 40°C - Permissible relative moisture: 80 % - Protection class: according to DIN EN 60529 IP 43 - Supply requirements: 230V 50/60Hz - Frequency: 50/60 Hz - Power input: 160 W - Auto power off: yes - Protection class DIN EN 60529: IP 43 - Tested to DIN EN IEC 61010-1. | |
| Catalogue Number | 9.737 801 |
| Manufacturer | IKA |
| Manufacturer P/n | 0002900000 |
| Feed particle size | 10 mm |
| Max. speed 1/min | 28000 |
| Max. feed quantity ml | 80 |
| IP code | IP 43 |
| Power supply | 230 V·AC, 50/60 Hz |
| Feed quantity | 80 ml |
| Type of auxiliary energy | Mains connection |
| Plug type | EU |
| Speed | 28000 1/min |
| Depth mm | 85 |
| Type | A 11 basic |
| Width mm | 85 |
| PK | 1 |
| Dimensions (WxDxH) | 85 x 85 x 240 mm |
| Rated capacity kW | 0.100 |
| Height mm | 240 |
| Weight kg | 1.5 |
| Max. feed particle size mm | 10 |