+353 (0)1 4523432
| Whirl-Pak® Filter bags, PE, sterile All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. Product Specification: Filling volume approx: 710ml Thickness: 0.102mm Dimensions (D x W): 150x230mm Description: with label | |
| Catalogue Number | 7.970 783 |
| Manufacturer | Nasco |
| Manufacturer P/n | B01348WA |
| Dimensions (WxH) | 150 x 230 mm |
| Sterile | Yes |
| Nominal capacity ml | 710 |
| With labelling field | Yes |
| Width mm | 150 |
| Material | PE |
| Temperature resistance | -210 ... 82 °C |
| PK | 250 |
| Thickness mm | 0.102 |
| Height mm | 230 |
| Min. temp. resistance °C | -210 |
| Max. temp. resistance °C | 82 |
SHOPPING CART
0 item(s) - €0.00
VIEW BASKET
