+353 (0)1 4523432
Shaking Water Bath Model SW23 Julabo 9 550 323
PART NO: G-9550323
Julabo Shaking Water Bath Type Sw23
Temperature Range : 22 To 90 oC (+/- 0.02)
Digital Display Of Temperature
Shaking Water Bath with MICROPROCESSOR technology
JULABO water baths and shaking water baths with seamless, splash-water protected keypad offer a high operating comfort
The bright MULTI-DISPLAY (LED) indicating up to 6 temperature values is visible from across the lab
Advanced MICROPROCESSOR technology with PID temperature control eliminates temperature overshoot and provides high temperature stability
The built-in timer simplifies time-dependent applications
The RS232 interface allows on-line communication with PC
Sensitive samples in the bath are well protected: As soon as the high and low temperature limits are reached an interval tone sounds
If the liquid in the bath reaches a minimum, a complete shut-down is effected and a permanent signal tone sounds
Instruments are conceived for unsupervised continuous operation
Bath tanks and all parts in contact with the bath liquid are made of high-grade stainless steel
- MICROPROCESSOR technology with PID temperature control
- Bright MULTI-DISPLAY (LED)
- Seamless, splash-proof keypad
- Splash-proof mains switch
- Electronic timer for setting the running time (0:01 to 9:59 h:min)
- On-line communication via built-in RS232 interface
- Early warning system with high and low temperature limits
- Drain screw for conveniently emptying the bath
- Dry-running protection / safety temperature fixed at 130 oC
- Wide range of accessories including lift-up Makrolon bath cover available
- EasyTemp control software is available free of charge
- Removable shaking carriage
- Shaking frequency adjustable from 20 to 200 rpm
- Shaking frequency indicated on MULTI-DISPLAY (LED)
- Shaking stroke 15mm
Temperature Range : 22 To 90 oC (+/- 0.02)
Digital Display Of Temperature
Shaking Water Bath with MICROPROCESSOR technology
JULABO water baths and shaking water baths with seamless, splash-water protected keypad offer a high operating comfort
The bright MULTI-DISPLAY (LED) indicating up to 6 temperature values is visible from across the lab
Advanced MICROPROCESSOR technology with PID temperature control eliminates temperature overshoot and provides high temperature stability
The built-in timer simplifies time-dependent applications
The RS232 interface allows on-line communication with PC
Sensitive samples in the bath are well protected: As soon as the high and low temperature limits are reached an interval tone sounds
If the liquid in the bath reaches a minimum, a complete shut-down is effected and a permanent signal tone sounds
Instruments are conceived for unsupervised continuous operation
Bath tanks and all parts in contact with the bath liquid are made of high-grade stainless steel
- MICROPROCESSOR technology with PID temperature control
- Bright MULTI-DISPLAY (LED)
- Seamless, splash-proof keypad
- Splash-proof mains switch
- Electronic timer for setting the running time (0:01 to 9:59 h:min)
- On-line communication via built-in RS232 interface
- Early warning system with high and low temperature limits
- Drain screw for conveniently emptying the bath
- Dry-running protection / safety temperature fixed at 130 oC
- Wide range of accessories including lift-up Makrolon bath cover available
- EasyTemp control software is available free of charge
- Removable shaking carriage
- Shaking frequency adjustable from 20 to 200 rpm
- Shaking frequency indicated on MULTI-DISPLAY (LED)
- Shaking stroke 15mm
| Shaking water baths, SW series For simultaneous heating and shaking of samples, e.g. incubations, hybridizations etc. Reciprocal motion. -microprocessor technology with PID temperature control -bright Multi-Display (LED) indicates five different temperature values and shaking speed -splash-proof mains switch, built into plastic membrane keypad -easy-to-use controls -timer for selecting desired operating period -RS232 interface provided -shaking frequency 20 to 200 strokes/min., with 15mm stroke -removable shaking carriage -model SW23 has an internal circulation pump giving enhanced temperature stability Bath lid not included. Product Specification: Product Type: SW23 Capacity: 20 Litres Working Temp. range: 20 to 99.9 °C Temp. Stability: 0.02 ± °C Heating power: 2000 W Bath opening: 500 x 300mm Bath tank depth: 180mm | |
| Catalogue Number | 9.906 384 |
| Manufacturer | Julabo |
| Manufacturer P/n | 9550323 |
| Depth int. mm | 300 |
| With timer | Yes |
| Max. speed 1/min | 200 |
| Int. width mm | 500 |
| Max. capacity l | 20 |
| With stopcock | Yes |
| Ext. height mm | 260 |
| IP code | IP 21 |
| With lid | No |
| Power supply | 230 V, 50/60 Hz |
| Heating capacity kW | 2 |
| Max. temperature °C | 99,9 |
| Type of auxiliary energy | Mains connection |
| Capacity | 8 ... 20 l |
| Plug type | EU |
| Speed | 20 ... 200 1/min |
| Min. capacity l | 8 |
| Type | SW23 |
| Height int. mm | 180 |
| With circulation | Yes |
| Temperature | 20 ... 99,9 °C |
| Ext. depth mm | 350 |
| Min. speed 1/min | 20 |
| Display | Digital |
| Ext. width mm | 700 |
| Type of display | LED |
| PK | 1 |
| Min. temperature °C | 20 |
| Shaking stroke mm | 15 |
| Weight kg | 20.7 |
| Ext. dim. (WxDxH) | 700 x 350 x 260 mm |
| Temperature stability °C | ±0,2 |
| Int. Dim. (WxDxH) | 500 x 300 x 180 mm |