+353 (0)1 4523432
Mechanical Shore Hardness Tester HB A
PART NO: 6-HB0100-0.
Price: €130.00
Out of Stock (Ships in approx. 1 week)
Compact handheld durometer with drag indicator
-Typical application: measurement of penetration (Shore)
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
-Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
-Shore D plastics, formica, epoxides, plexiglass etc.
-Shore A0 foam, sponge etc.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
Delivered in a wooden carrying case
hardness comparison plates see SAUTER AHBA-01 and SAUTER AHBD-01
-Typical application: measurement of penetration (Shore)
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
-Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
-Shore D plastics, formica, epoxides, plexiglass etc.
-Shore A0 foam, sponge etc.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
Delivered in a wooden carrying case
hardness comparison plates see SAUTER AHBA-01 and SAUTER AHBD-01
| Catalogue Number | 6.312 365 |
| Manufacturer | Kern |
| Manufacturer P/n | HB0 100-0. |
| Width mm | 60 |
| Weight g | 160 |
| Dimensions (WxDxH) | 60 x 25 x 115 mm |
| Type | HB0 100-0 |
| Height mm | 115 |
| Material housing | Metal |
| Depth mm | 25 |
| Tolerance % | 3 |
| PK | 1 |
| Measured range | 100 HA0 |
| Display | Analogue |