Your basket is empty
Home > Laboratory > Sample Preparation > Sampling > Sampler - Liquid > Dipping bottle glass > Burkle Dipping Bottle to DIN 51750 5365-4000

Burkle Dipping Bottle to DIN 51750 5365-4000
Enlarge

Burkle Dipping Bottle to DIN 51750 5365-4000

PART NO: 4AJ-9303938
Price: €553.50
Out of Stock (Ships in approx. 2 weeks)

1000ml

(Liquid samplers, vessels and bottles) Dipping vessels
According to DIN 51750 pt. 2
Dipping Vessel
For sampling liquids from tanks, lorry tankers, etc. Made for Ex-use or stainless steel V2A. 1L capacity, 82mm diameter, 427mm height with handle. Without lowering cable.
Operation: Lower vessel into liquid. Bottom and cap valves open automatically. Liquid flows through the vessel. The valves close at the target depth, and the desired sample can be collected.
Dipping bottle EX
For sampling flammable liquids.
For sampling group A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89mm diameter, 443mm height with handle, weight 3.2 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.
Dipping bottle glass
For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148mm diameter, 330mm high, weight 3.3 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.
Immersion Cylinders
For target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Heavy, robust design (4.1 kg). Without lowering and pull cables
Target spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.
Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.5 kg. With 5 m venting tube. Screw off top enables easy cleaning.
Mini immersion cylinder
For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32mm diameter, height 180mm, weight 350 g. Without lowering cable. Upper body unscrews for easy cleaning.

Product Specification:
Product Type: Dipping bottle

Catalogue Number9.303 938
ManufacturerBurkle
Manufacturer P/n5365-4000
Fisher Ref3392784
Ex protectedYes
Ø mm148
PK1
MaterialBrass
Weight g3200
Nominal capacity ml1000
Height mm330
Dimensions (ØxH)148 x 330 mm
Thermo Fisher:3392784

Burkle Mini-Sampler PE Complete With 7 Bottles 5305-0100
PART NO: 4AJ-9303970
Price: €222.80

Your basket is empty