Carbon Dioxide Safety Monitor AX60

Home > Environmental > Sample Preparation > Air Sampling and Analysis > Carbon Dioxide Safety Monitor AX60

Carbon Dioxide Safety Monitor AX60

Gas warning device for precise measurement of the amount of CO2 in the air. 3 alarm settings factory set: Time-weighted average (TWA) alarm (5000 ppm; 0.5% CO₂), Low alarm (15,000 ppm; 1.5% CO₂) and High alarm (30,000 ppm; 3% CO₂)

No calibration required (unless local regulations state otherwise)
Very long life sensor can last up to 15 years
Up to 4 x CO₂sensors and 8 x CO₂ alarms can be used per Central Display Unit
Supplied with a relay on each alarm which can be used to trigger ventilation, extraction or a building management system
Easy installation and maintenance can be conducted by the user
Additional (quick connect) CO₂ sensors and alarms available if more than one entrance to the laboratory or more than one risk area
Assists in compliance with Exposure Limit regulations such as EH40

Scope of delivery: wall-mounted central display unit, CO₂ sensor and CO₂ alarm which can provide an early warning of a CO₂ leak.

Specifications:
Range : Accuracy :	0.1 to 5 % CO₂ +/- 5 % of alarm setpoint
Alarm intensity :	88 dbA
Monitor Display :	16 digit 2 line LCD in ppm
TWA Alarm :	5,000 ppm (0.5 %) over 8 hours
CO₂ Alarms :	15,000 ppm (1.5 %) and 30,000 ppm (3 %)
Operating Temperature :	-5 to 50 °C
Central Unit Dimensions :	175 x 110 x 75 mm
Sensor & Alarm Dimensions :	72 x 170 x 45 mm
IP Rating :	IP55 (IP54 Central Display Unit)
Warranty :	5 years for electronics and sensor