+353 (0)1 4523432
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Accessories for turbidity meter TB 211 IR
- Accessory holders for sedimentation cones, PVC
- Calibration Kit for Turbidimeter Eutech™ TN-100
- Coagulant injector for flocculation testers FJT-200D-6
- Flocculation tester ET 730 / ET 740 / ET 750, bench top
- Flocculation testers FJT-200D
- Imhoff Sedimentation cones, borosilicate glass 3.3
- Imhoff Sedimentation Cones, SAN
- Imhoff sedimentation vessels, Nalgene®, PC
- Laboratory turbidimeter TB 300 IR
- Rack for Imhoff sedimentation vessels, Nalgene®, acrylic
- Secchi Disk
- Secondary turbidity standards Gelex
- Sedimentation cone, plastic, SAN
- Sedimentation cones acc. to Imhoff, borosilicate glass 3.3
- Sedimentation cones, accessory holder
- Sedimentation cones, accessory holders
- Sedimentation cones, accessory stand, Acrylic/PP
- Sedimentation cones, borosilicate glass 3.3
- Sedimentation unit set, Nalgene®, PC
- Stand for Imhoff Sedimentation cones, PP
- Stands for Imhoff cones, PMMA
- Turbidity meter Eutech™ TN-100
- Turbidity meter TB 211 IR
- Turbidity meter Turb® 355
- Turbidity meter Turb® 750 IR
- Turbidity meter Turb® 750 T
- Turbidity meters Turb® 430
- Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS
- Turbidity Standards
- Turbidity Standards Formazine
- Turbidity Standards StablCal® Formazine
- USB-C cable
- Viewdepth disk
- Sample Preparation
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensor
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Turbidity meter Eutech™ TN-100
The microprocessor-based waterproof Infra-Red Turbidity meter TN-100 is easy-to-use and meets all rigor of rugged field applications. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).
- IP67 Waterproof and Dustproof, easy cleaning and maintenance
- Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
- Power-saving feature allows over 1200 measurements
- Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
- Meets Performance Criteria as specified by ISO 7027 (DIN EN 27027) method
Scope of supply: Turbidity meter with 4 calibration standards, 3 empty cuvettes, sturdy carrying case, batteries and instruction manual
| Specifications | |
| Turbidity range: | 0 to 2000 NTU |
| Resolution: | 0.01 NTU (0 to 19.9 NTU) 0.1 NTU (20.0 to 99.9 NTU) 1 NTU (100 to 2000 NTU) |
| Accuracy: | ± 2 % of reading ± 1 LSD ( 0 to 500 NTU) ± 3 % of reading ± 1 LSD (501 to 2000 NTU) |
| Repeatability: | ± 1 % of reading or ± 0.01 NTU |
| Calibration Points: | 4 points (automatic) |
| Response Time: | < 6 seconds for full step change |
| Calibration Standards: | 0.02 NTU; 20.0 NTU; 100 NTU; 800 NTU |
| Light Source: | Infrared-emitting diode (850 nm) |
| Light Source Life: | > 1,000,000 tests |
| Power supply: | 4 x 1.4 V batteries, > 200 h |